Things have been very busy in the pen, commissions are full up till xmas, the guys I game with are putting on an Eylau demo game and we are busy setting up the table and getting the last of the figures painted plus I have been setting up a online news letter come discussion forum for those of us who enjoy 17th-18th century gaming, Imangi Nations, painting and tinkering with classc Old School rules and figures. More on
The Odd Fellows Wargaming Lounge later.
I had a busy day last Friday playing around with terrain and suff. Beside mucking about with trees and such for our Eylau table I decided to start work my own terrain and assemble some modular terrain boards that have been lying around the house untouched for far too long.
The boards/modules by
Back2Basix are held together by rare earth magnets and have a natty system for incorporating different sizes both in area and height and come with a disc with full video intructions.
Anything
that involves static grass has now bee moved to the shed, no good
having it floating around the house when doing commission painting, my
skanky cockatiel's are bad enough and as for cats fur, as the Breaker
said "rule 303!"
All
the pieces are laser cut and fit very precisely, first of the edges
need a bead strip glued to the back of them to prevent the magnets from
pushing through and then the edges are glued to the top (playing
surface), the pic's show the boards upside down for fixing the edging.
Modules shown are 100 x 300mm.
Weighting
the boards while the glue dries, this is a modular system and
accommodates boards of a mix of different lengths and widths very
simply, as you can see 100mm 150mm and 300mm. The modules shown are 300 x
300mm if I was to use them with 100mm or 150mm I would simply need to
glue in magnets into the holes provided.
300 x 300 x 32mm module with static grass, now for decorations
These
boards will be for easy going (might provide cover for prone troops) so
I don't need much in the way of terrain features just enough to break
up the blandness. I cleaned off the static grass and with white glue and
gesso painted on the bare backing sprinkled over some sharp sand and
some small pieces of blue metal (gravel) and then wait for the glue to
dry.
I
have made up a slurry of gesso and white glue and dribbled it over the
loose sand that wasn't in contact with the base and keep repeating the
whole process until it looks right. In this instance I want the bare
earth patches to look like boney ground with the last remnants of
weathered rock so they must appear higher than the static grass rather
than lower, the larger bits of gravel have smaller pieces placed around
them an in some instances sand up and also over the sides. I simply use
gesso to glue the gravel in place.
Bit of maintenance while I wait for the glue to dry sufficiently
Sand
and gravel painted and with a bit bit of tuft, creeper and flower
decoration added, might slop a bit of ink over the outcrops to add a bit
of depth
General
overview, next I will clean up around the outcrops and work some
variation into the static grass possibly make a few low laying shrubs or
bracken and then onto the 300 x 100mm modules. These pic's were taken
outside hence the change in colour from those under the fluro lights
